Heating Systems

10 Comments

  1. STARFIRESOLAR
    Posted December 26, 2011 at 6:23 pm | Permalink

    Wouldn’t these mats be more efficient in heating the room if installed in
    the floor?

  2. ushinnovationen
    Posted January 5, 2012 at 10:20 am | Permalink

    They are available for underfloor-heating as well. If there isn’t enough
    space to achieve the needed heat energy you may combine both systems. Wall
    heating is often used due to the heat radiation which gives you a more cozy
    feeling compared to convective heating.

  3. telosfd
    Posted December 8, 2012 at 11:42 am | Permalink

    Ok, what is the power of these elements? And how much it cost when price is
    0,07-0,09Euros per KWh!!!!!!!!!!

  4. tirip01
    Posted December 19, 2012 at 11:24 pm | Permalink

    How silly is that?? Why not simply insulate the wall properly instead of
    heating an outside wal and losing all the energy into the environment?
    Laughable.

  5. 2manyredtapes
    Posted January 19, 2013 at 7:57 am | Permalink

    Excellent system, love it … where can I buy these pipes? Just worried
    someone is going to drill or put nail into the finished wall …..

  6. pajkko1
    Posted January 25, 2013 at 4:20 pm | Permalink

    no1 talking for air in top of instalation??? how u fix that….?

  7. TheGojodfrey
    Posted February 5, 2013 at 6:25 am | Permalink

    The wall is very high performance lightweight blockwork, (the white stuff),
    you would never fix this to a thermally poor external wall. However if used
    on an un-insulated internal wall, it will use the density of the structure
    as a heat store, having initial thermal inertia then longterm retention.

  8. TheGojodfrey
    Posted February 5, 2013 at 6:28 am | Permalink

    the pipes being small diameter are normally filled forcing the air out, and
    tested before plastering, really easy, connect to a hose, and stick the
    other end into a bucket until the bubble stop, that way your wall will not
    gurgle. Floor heating has a similar problem due to slow flow rates, so
    flushing the same way is normally done before testing, additionally in a
    floor it stops the pipe (larger diameter) from trying to float where
    someone forgot to clip it down properly !

  9. 3bdura7man
    Posted March 10, 2013 at 3:24 am | Permalink

    that is something i didn’t think about! and it is so important! i think
    floor pipes are enough :

  10. cornishman1987
    Posted June 23, 2013 at 7:08 am | Permalink

    i wouldn’t like to hang any picture frames up on the wall lol, but
    excellent idea for overcoming damp walls in the old cornish houses.

Leave a Reply

Your email address will not be published. Required fields are marked *